Capabilities and Equipment

Machining Centers

image40

  • 2 - MAKINO A-51 NX HORIZONTAL - 30 HP 14,000 RPM SPINDLE 22.0" x 25.2" x 25.2" Work Area 899 Pound Weight Capacity 60 Tool Magazine Through Spindle Coolant
  • 2 - MAKINO A-51 HORIZONTAL - 30 HP 14,000 RPM SPINDLE 22.0" x 22.0" x 23.6" Work Area 880 Pound Weight Capacity 60 Tool Magazine
  • 1 - HARDINGE/BRIDGEPORT VMC 1500 XP - 40 HP 7,500 RPM SPINDLE 60.0" x 26.0" x 24.0" Work Area 3,300 Pound Weight Capacity 30 Tool Magazine
  • 1 - HARDINGE/BRIDGEPORT XR 1000 - 25 HP 12, 000 RPM SPINDLE 40.0" x 24.0" x 24.0" Work Area 2,000 Pound Weight Capacity 30 Tool Magazine
  • 1 - HARDINGE/BRIDGEPORT XV 710 - 20 HP 8,000 RPM SPINDLE 28.0" x 18.0" x 18.0" Work Area 990 Pound Weight Capacity 20 Tool Magazine
  • 2 - MAKINO A-55 HORIZONTAL – 30 HP 14,000 RPM Spindle 22.0” x 22.0” x 22.0” Work Area 880 Pound Weight Capacity 128 Tool Magazine Through Spindle Coolant Attached to 23 Station Robotic Pallet Changer
  • 2 – MAKINO A 55 HORIZONTAL – 30 HP 12,000 RPM Spindle 22.0” x 22.0” x 22.0” Work Area 880 Pound Weight Capacity 60 Tool Magazine Through Spindle Coolant Attached to 23 Station Robotic Pallet Changer
  • 1 – MATSURA 800 VF VERTICAL – 20 HP 5,000 RPM Spindle 31.5” x 17.32” x 19.1” Work Area 1,100 Pound Weight Capacity 30 Tool Magazine

Turning Centers

image41

  • 1 TOYODA TAKISAWA LA-250YS - Live Tooling with Sub Spindle 30HP Main Spindle 15HP Sub Spindle 3,500 RPM 23.6" Maximum Swing  29" Maximum Turning Length  14.6" Maximum Turning Diameter
  • 1 – NAKAMURA TOME TW-30 TWIN SPINDLE – 30 HP Both Spindles 3,500 RPM Spindles 2 Twelve Station Turrets 13.9” Maximum Swing 11.81” Turning Length
  • 1 – NAKAMURA TOME SC-450 – 30 HP 2,500 RPM Spindle 12 Station Turret 20.47” Maximum Swing 18.31” Maximum Turn 30.91” Turning Length
  • 1 – HAAS SL 20 – 20 HP 4,000 RPM Spindle 10 Station Turret 23” Maximum Swing 10.3” Maximum Turn 20” Turning Length
  • 2 – NAKAMURA TOME SC-300 – 18 HP 3,500 RPM Spindle 12 Station Turret 17.71” Maximum Swing 13.78” Maximum Turn 23.62” Turning Length

Additional Machines

image42

  • WARNER & SWASEY #4 TURRET LATHE – 18.5” Swing 2.0” Bar Capacity
  • MILLRITE RAM & TURRET MILLING MACHINE
  • BEHRINGER 303A AUTOMATIC BANDSAW – 12.0” Round or Square Capacity
  • WELLSAW MANUAL BANDSAW 9.0” Round 9.0” x 16.0” Flat Capacity
  • WILTON DRILLING & TAPPING MACHINE 12.0” Throat 16.0” x 20.0” Table 
  • 20 TON PRESS 18.0” x 20.0” Work Area 32.0” Ram Travel

Precision Coil Winding

image43

 

1 – AUMANN WINDING MACHINE  7.1” Diameter 7.87” Length .002” - .197” Wire Diameter

VACUUM POTTING CENTER

DUAL WIRE BONDING STATIONS

Balancing

image44

 1 - BALMAC BALANCING MACHINE – SINGLE PLANE – 30 Pound Capacity 30.0” Dia. 

image45

Part Washing Equipment

PART WASHING DEPARTMENT IS EQUIPPED WITH SEVERAL PART WASHERS WITH THE FOLLOWING CAPABILITIES: HEATED HIGH PRESSURE FLUSH, CONTINOUS FILTERING OF SOLUTION, ULTRASONIC TANKS AND AGITATING MOTION. 

Deburring

DEBURRING DEPARTMENT HOSTS VIBRATORY FINISHING EQUIPMENT WHICH IS USED TO DEBURR, DESCALE AND POLISH SURFACES.


G.M.W. OFFERS MANUAL AND AUTOMATED DEBURRING SERVICES. 

Are your customers raving about you on social media? Share their great stories to help turn potential customers into loyal ones.

Additional Capabilities

 

MULTI SPINDLE SCREW MACHINES UP TO 2.625” DIA.

SINGLE SPINDLE SCREW MACHINES UP TO 1.375” DIA.

CENTERLESS GRINDING

INDUCTION HEAT TREAT

LIGHT PUNCH PRESS WORK

LASER CUTTING